1.4.1 Oscilloscope
The module „Oscilloscope“ has 2 measurement channels. They dis-
play frequency signals up to 500
kHz. All frequency signals meas-
ured above this limit are non-existent in reality. This should be kept
in mind when defining a completely unknown signal. Both channels
share a common time basis.
1.4.2 Voltmeter
With the help of a virtual pointer element, the total RMS value, the
DC or AC voltage component of the input signal may be displayed.
AC voltages may have very high peak voltages even at low RMS val-
ues. The high peak voltages must always be within the scale limits.
If this is not the case, the measurement result is falsified. If you do
not know the measurement signal, you should work with a high divi-
sion factor. The oscilloscope function allows you to get an image of
the wave pattern.
