The second generation of the MEphistoLab software provides a vir-
tual instrument panel that offers simply and quick access to all the
device’s functions.
You may choose between the following models (Tip: In case you
don’t have a MEphisto Scope, choose the menu „Extras – Options
– Driver“, then go to „Simulation“ and try the software without
connected hardware:
„Oscilloscope“ 2 channels, max. 1 MS/s per channel, voltage
range: ±10 V (see chapter 1.4.1, p. 12)
„Volt meter“ 2 channels (AC
eff
/AC/DC)with up to 6 virtual
pointer instruments (see chapter 1.4.2, p. 12)
„Analog data logger“ 2 analog channels, max. 100 kS/s, volt-
age range: ±10
V (see chapter 1.4.3, p. 13)
„Digital-I/O“ 24
Digital-I/Os, configurable by bit, 5 V CMOS-level
(see chapter 1.4.4, p. 14).
„Logic analyzer“ 16 channels (D0…15), max. 100
kS/s per
channel, 5 V CMOS-level (see chapter 1.4.5, p. 15)
„Digital data logger“ 16
channels (D0…15), max. 100 kS/s,
5 V CMOS-level (see chapter 1.4.6, p. 16)
„Data viewer“ Analyzes saved data (see chapter 1.4.7, p. 17).
„Offline mode“ The model UM203 saves data onto a SD-card
(see chapter 1.4.8, p. 17).
