27 / 44
9625762
15.3.4 Configuration level
You can find the list of configuration parameters on this level (parameter numbers 2xx). +
Here you can view these and modify them. You can also call up the status of the inputs
and outputs, or set the outputs for testing.
On the configuration level, you will first see the display below:
This corresponds to the viewing/modifying parameters. (see 15.3.1).
This corresponds to viewing the status of inputs. (see 15.3.6).
This corresponds to viewing and setting the status of outputs. (see 15.3.7).
Press the “I” key to move forwards or the “III” key to move backwards or the “accept” key
to make a selection. You are now at the current level.
You can leave this level by pressing the “0” key.
15.3.5 Viewing / modifying parameters (depending on the code en-
tered)
Indication
this display by pressing the “accept” key.
Now, the first parameter will be displayed with a value.
Press the “I” key to move forwards or press the “III” key to move backwards, until the pa-
rameter you require is displayed.
Confirm the parameter to be modified by pressing the “accept” key, the value will flash. +
Press the “I” key to increase the value, the “III” key to decrease the value, and the “ac-
cept” to save the value.
You can leave this level by pressing the “0” key. See 15.4 for list of parameters
