Do’ and Don’ts
Do’ and Don’ts
(continued)
Figure 7
Figure 8
On a Dixie Narco 5000, a suitable place to
run the Power MDB cable is in the open
space between the coin mechanism and
bill validator. (See Figure 9)
Do not coil any cables. Run all
cables for every installation.
(See Figures 10 and 11)
Use a wire tie wrap and
mounting anchor to firmly
secure the Power MDB and
DEX cables against the
vending machine door.
(See Figure 11)
Figure 10
Figure 11
Figure 12
Do
Do
Do
Don’t
Do
Don’t
Figure 9
Figure 6
Don’t
AAdvance 5XXX Wiring:
The ADV 5XXX should never be
mounted horizontal due to water
ingress and visual verification
reasons. (See Figure 6) Mount on
the outer right side of the vertical
payment system channel.
(See Figure 7)
On a Dixie Narco 276, the
ADV 5XXX may be mounted
behind the vending machine
control board if there is not
a sufficient amount of space
on the outer right side of the
vertical payment system
channel. (See Figure 8)
10
11
