12) Connect the DEX plug to the vending machine DEX jack. This
DEX jack (if installed) can be found on either the vending
machine control board or on a harness plugged into the
vending machine control board.
Note:
If the machine has no DEX jack, ensure that you tie
off the harness from the connector so it does not impede
machine operations. The Advance 5XXX does not require
the DEX connection to collect information.
13) Power
ON
the vending machine. The L1 red LED should be
flashing on the ADV 5XXX. When the unit is Ready and
On-Line, the L1 and L2 LEDs will be solid red and the L3 LED
will be flashing.
Unit is ready and online
14) The installation is now complete and ready for testing. Record
the machine unique ID, Asset and ADV 5XXX serial numbers
and perform a
Fill Key
operation.
15)
Optional:
Using
the
MEI Telemeter Service Tool
, program the
machine asset number into the ADV 5XXX and the VMC from
your Data Shuttle Unit.
16)
Optional:
Use the Survey Tab of the
MEI Telemeter Service
Tool
to inventory the vending machine.
The Do’s and Don’ts of a Quality
ADV 5XXX Installation
Advance 5XXX Antenna Placement:
Do’ and Don’ts
Do
On a Dixie Narco 5000, the GPRS
antenna must be mounted on the top of
the vending machine above the service
area compartment. Note: Install GPRS
antenna extension bushing.
(See Figure 4)
Figure 4
The GPRS antenna must be placed on
top of the vending machine and
spaced a minimum of 8” from people
and any other antenna. (See Figure 1)
On a Royal 500, the GPRS antenna
must be mounted on the top corner
above the payment system channel
in between the two mounting arms
of the delivery mechanism control
board. (See Figures 2 & 3)
Figure 1
Figure 2
Figure 3
On a Dixie Narco 5000, do not mount
the ADV 5XXX in the rear, against the
cabinet wall. The ADV 5XXX may be
mounted on the door near the bill
validator. (See Figure 5)
Figure 5
Don’t
Do
Do
Do
Do
8
9
