Advance 5XXX (A5K)
Installation:
Getting Started
• Contact your MEI sales representative or Authorized MEI Distributor to
discuss system options.
• Your MEI representative will conduct a site survey to determine
equipment requirements.
(Optional)
• Locate a position where the Easitrax
TM
Advance 5XXX is easily
accessible. Make sure that the wiring harnesses will reach,
the LEDs
are visible, and that no objects are obstructing the DEX Jack.
Before Installation
• Verify that the machine and its components work properly prior to
installation.
Fix and clear all errors.
• Perform a test vend and verify change payback.
• Visually inspect machine cables for defects. Replace as needed.
• Locate mounting position and harness routing options for the GPRS
antenna as applicable.
• Power should be removed from the vending machine prior to starting
the installation.
Needed Tools/Supplies
• Wire Cutters
• Wire Ties – Black UV stable wire ties and self-adhesive wire tie bases.
• Pliers or Adjustable Wrench (To tighten the nut on the Antenna where
it goes through the Vending Machine Cabinet).
• Cleaning materials for vending machines. (Mild detergent)
• 1/2” drill w/metal bit (To install the antenna outside the machine)
Antenna Installation
Antennas shall be installed so that a separation distance of 20cm (8
inches) is maintained from individuals and other antennas during normal
use. Ensure that the antenna cable in not damaged by the opening and
closing of the vending machine door.
Do not coil excess antenna
cable
. Only the antenna supplied with this device is to be used.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Harness Dressing Recommendation
All products and cables should be securely fastened to the vending
machine. The installer should provide additional UV stable cable ties
to securely fasten all cables to the vendor. Any excess cable should
be fastened to the vending machine and service loops should be
minimized.
INSTALLATION COMPONETS
MDB Vending Machine
Easitrax
TM
Advance 5XXX
Required Components:
Description
Part Number
Easitrax
TM
Advance 5XXX (ADV 5XXX)
Contact your
sales rep.
GPRS Antenna
213701001
ADV 5XXX Power MDB harness
216571001C
ADV 5XXX DEX harness
215637033C
Adhesive anchors for wire tie wraps
Wire tie wraps
Install Guide
4
5
