Megger TM1700 Series, Руководство пользователя

Страница: 47 / 92

BL1448GE ZP-BL16E TM1700-sEriEs 47
4 CABA LOCAL
Select transducer
if you in Breaker View, Motion measurement prefer-
ences have selected Absolute (see section 6.12) “se-
lect Transducer” is blinking on the active channel.
1]
For selecting a transducer press the “SELECT”
button whereupon the transducer list ap-
pears.
2]
Select the appropriate transducer and press
the “Select” button.
Now the transducer is selected which then is indicated by
displaying the transducer name at that specific channel.
Monitor
1]
By pressing the “MONITOR” button you will
see information about the actual breaker
measurement and status.
Note To get information from control sections con-
nect blue cable to NC and red cable to OUT.
The actual situation is displayed for each channel which is
either a measurement value or a graphical contact open/
close information.
2]
Press the “HOOK UP” button to go back to
the hook-up presentation.