4
PN: 81127
Rev 4, 6/2017
SAFETY PRECAUTIONS
(Continued)
The following are specific safety related items associated with the test system.
Read and understand all safety precautions and operation instructions before attempting
to use this unit.
The purpose of this equipment is limited to use as described in this instruction manual.
Should a situation arise that is not covered in the general or specific safety precaution
please contact Megger regional representative or Megger, Dallas, Texas.
Safety is the responsibility of the user. Misuse of this equipment can be extremely
dangerous.
Always start with the power OFF, before connecting the power cord. Make
sure outputs are off before attempting to make test connections.
Never connect the test set to energized equipment.
Always use properly insulated test leads. The optional test leads are rated for
the continuous output ratings of the test system, and should be properly used
and cared for. DO NOT use cracked or broken test leads.
Always turn the test system off before disconnecting the power cord.
DO NOT attempt to use the unit without a safety ground connected.
DO NOT attempt to use the unit if the power cord ground prong is broken or
missing.
DO NOT use the test set in an explosive or flammable atmosphere.
DO NOT use the test set in a wet environment.
The instrument must only be used by suitably trained and competent persons.
Observe all safety warnings marked on the equipment.
Safety related or other important topics, like the statement below, will be
notated with the adjoined symbol. Read the topic carefully as it may relate
either to the safe operation of the test system or the safety of the operator.
The
Model SPI is not designed for use on energized circuits. For the safety of the
operator and protection of the instrument, do not connect it to circuits that are
energized. This includes circuits that could become energized during the
course of a test procedure utilizing this instrument
.
