12
PN: 81127
Rev 4, 6/2017
2.3
Smart Touch View Interface
The STVI is the manual control and user interface for the unit. All manual entries will be made through
the STVI unless the unit is connected to a personal computer. During the power up sequence the test
system automatically does a self-test to insure everything is operating properly. Once the system has
completed
it’s self-checks the Introduction Screen will appear as shown in Figure 4. If the software
detects a SPI it will be automatically connected and the main SPI Startup Screen (Figure 8) will be
displayed.
Figure 4 - Introduction Screen
When using the
PC version
of the STVI software, the Instrument Selection Screen will be displayed.
Note that the software is used to communicate with numerous instruments. The SPI icon should be
located under the heading of Breaker Test Sets. Click on the SPI button in the Instrument Selection
Screen to connect to a SPI.
Figure 5 - Instrument Selection Screen
