Megger PQ2000, Руководство пользователя

Страница: 92 / 94

M
MPQ2000-UG-EN Rev 8 October 2018
86
11. Replace the battery cover and secure with the 3 screws.
12. Carefully place the front panel back into the enclosure. Be sure not to pinch any
wires.
13. Install the four screws that secure the front panel to the enclosure.
14. Turn on the MPQ2000 by pressing and releasing the ON/OFF button. The
battery status indication should indicate 0%. The battery status indicator must
be initialized before it will display the true charge level of the battery. This is
done by discharging the battery to below 10% of its capacity.
15. Go to the SETUP > PREFERENCES screen by pressing the HOME key,
scrolling down to the SETUP menu item and pressing the ENTER

key and
then scrolling down to the PREFERENCE menu item and pressing the ENTER

key.
16. Select the AUTO-OFF box and, if necessary, toggle it to its un-checked state by
pressing the ENTER

key. This will allow the unit to remain on even when
not being actively used.
17. Allow the battery to fully charge for 4 hours.
18. Allow the unit to remain on until it has shut down due to a low battery.
19. Allow the battery to fully charge.
The charger (coulomb counter) will now be synced to the new battery.