Megger PQ2000, Руководство пользователя

Страница: 67 / 94

Starting and Stopping a Recording
MPQ2000-UG-EN Rev 8 October 2018
61
The operator has the option to do the following:

Manually change the range on the CT to the correct range.

Have the analyzer automatically change the range in the setup file to match the
range setting on the CT.

Ignore the mismatch. Please note: if this option is chosen the current values recorded will be
incorrect.
The analyzer will check the CT ranges for each channel individually. Therefore it is
possible to get the same message 3 times. Each message will display a different
channel.
Once the analyzer determines the configuration is correct it will start the recording
and the following screen will appear.
This screen will display the Duration of the Recording, the Time Remaining, the Voltages and
Currents as well as any events that have been captured.