Performing measurements
28
4.2.1.2
Creating a folder manually
If there is no QR code on the measurement object, then a measurement data folder
must be created manually. To do so, proceed as follows:
1. Select the menu item
New measurement
in the main menu.
2. Select the menu item
Create new folder
.
A new folder is created, the name of which is comprised of the current data and
a running index.
3. If you would like to modify the name of the folder, select the
Rename folder
button. In most cases, including the number/designation of the measurement
object in the folder is useful, in order to be able to clearly allocate the measured
data recorded easier later on.
4. Confirm the folder name using
and select
to access the operating mode
selection.
5. Repeat these steps as soon as you change to a different measurement object.
