Megger PAT4DV/3 Скачать руководство пользователя страница 37

Страница: 37 / 51

Visual Inspection List.

The Visual Inspection is to check the condition of:
• Case for damage; tears; cracks.

• Supply socket.

• Mains Plug.

• Environment e.g. operational hazards nearby.

• Mains Lead.

• Suitability i.e. used for correct purpose.

• On/Off Switch.

• Everything Else.

1 The test screen prompts the user to select either

PASS

FAIL

, if

PASS

is selected the test will progress

onto the next selected test in the group.

2 If

FAIL

is selected, then the screens will prompt to specify the nature of all the faults noted.

3 Press

YES

to specify the Visual inspection failures.

4 Check for any hazards in the vicinity, e.g. asset is exposed to water.

5 Check asset is suitable for the task it is being used for.

6. Any other hazards present.

Note: - If an asset fails the visual inspection, no further tests will be performed and a repair code may be entered (see ‘Repair Codes‘)

Description of Tests

Visual Inspection

FAIL

PASS

TESTS QUICK-CHECK

COMMS

MENU

TESTS QUICK-CHECK

COMMS

MENU

TESTS QUICK-CHECK

COMMS

MENU

TESTS QUICK-CHECK

COMMS

MENU

Everything else OK?

YES

Suitability OK?

YES

Environment OK?

YES

Supply socket OK?

YES

On/Off switch OK?

YES

Mains lead OK?

YES

Mains plug OK?

YES

Case OK?

YES

Содержание PAT4DV/3




















































Результаты поиска

Содержание PAT4DV/3

Отзывы:

Похожие инструкции для PAT4DV/3

Бренды по названию

Популярные бренды

Megger PAT4DV/3, Руководство пользователя

Результаты поиска

Содержание PAT4DV/3

Отзывы:

Похожие инструкции для PAT4DV/3

Бренды по названию

Популярные бренды