Envoy E Series User Guide 20171215-40.docx
Page 55 of 64
Audio playback bookmark
Setting the bookmark
During audio playback, a 2-second press on the pause button
will place a bookmark at the current position.
The player will beep 3 times to confirm and place the player in
pause mode
(
see
Figure 9: Buttons for navigating
the Current Chapter, the Pause button).
When the player is turned back on later, it will always begin to play from this bookmark. This bookmark will
persist until it a) is removed (
see below
) or b) is reset to a different place in the audio.
The Envoy E Series player supports 2 audio playback bookmarks – a permanent (
explicit)
one (that may be
set by the user by using the instructions above) and a temporary (
implicit
) one (which is managed internally by
the player). When switching from Audio Playback mode to another mode a temporary bookmark is always set.
When returning to Audio Playback mode from another mode, if there is a permanent bookmark set it will be used
as the point from which to resume playback. If not, the temporary bookmark will be used for resumption of
playback.
Resetting the bookmark to the beginning
To reset the bookmark to the
beginning
of the audio message, follow these steps:
1.
During audio playback, press the pause button
.
2.
Once the player is paused, press the volume up button
on the side of the player for 2 seconds. The player
will beep once to confirm.
3.
The bookmark is now reset to the beginning of the audio message.
4.
You may resume playback or turn the player off.
