Envoy E Series User Guide 20171215-40.docx
Page 48 of 64
The
micro
SD card connector
All E Series models can also play content from a properly formatted
micro
SD card. You may load up to 8
language folders to a single
micro
SD card, effectively increasing the capacity from 2 languages (onboard
memory) to 10 languages total. MegaVoice has successfully tested cards up to 64GB in size.
With the player facing you, insert a card into the reader with the brass contacts showing until it locks in place.
Once the
micro
SD card is loaded, press the Language button
for 2 seconds repetitively until the player
beeps once. Playback will now begin from the card. The LED will show as
green
.
To remove the
micro
SD card, gently push it in. The reader will unlock and push the card out so you can remove it.
If the player was in playback mode from the card when removed, it will beep twice and revert to the onboard
memory. If any other function was active, the function will continue with no interruption.
You can view, format and prepare a
micro
SD card while loaded in the player’s card reader when it is connected
to a Computer using a USB to micro-USB cable. You may also do the same with the card loaded in a
micro
SD
adaptor (shown below) connected to a Computer.
If the player is turned off while playing from an SD card and turned on later with the card still loaded, the player
will default to the card; otherwise, the player always defaults to the onboard memory.
Figure 18: Inserting a microSD card
Figure 19: SanDisk microSD-to-USB adaptor