#H5 6 PIN WHITE CONNECTOR FOR OUTPUT CONNECTION
1. White
Wire: (-) 200 mA Programmable output
Dome Light Control Output (Factory Default setting)
Or Horn Output
Or Factory Security Rearm Signal Output
Or Ground Output During Start (Crank).
6. Orange
Wire: (-) 500mA Grounded Output When Armed
4. Gray
Wire: (-) 200 mA Channel 3 (Trunk) Output
2. Yellow
Wire: (-) 200 mA Ignition 3 Control Output
5. Pink
Wire: (-) 200 mA Programmable output
2-Step Door Unlock Output (Factory Default setting)
Or Factory Security Disarm Signal Output
Or Start Status (Shock Sensor Bypass Control) Output
3. Black / Green
Wire: (-) 200 mA Time Control Channel 4 Output
#H7. 8 PIN BLACK CONNECTOR FOR INPUT CONNECTION:
2. Green
Wire:
Zone 3
Negative Door Pin Trigger Input:
1. Blue
Wire:
Zone 2
Instant Trigger Ground Input
3. Violet
Wire:
Zone 3
Positive Door Pin Trigger
7. White/Violet
Wire: (
+
) Positive Safety Shut Down Input for Brake switch.
6. Black/White
Wire: (
-
) Neutral Safety Switch Input &
(
-
) Remote Start Toggle Switch Input
8. White/Red
Wire: Tach. Signal Input
+12V
5. White/Black
Wire: (
-
) Negative Safety Shut Down Input for Hood pin switch
IMPORTANT NOTE:
Directly connect the H7/6 BLACK/WHITE wire to the “GROUND” when this wire
is not used.
+12V
4. White/Blue
Wire: (-) Instant Start and Turn Off Input.
3
