Medora SolarBee SB10000DM, Руководство пользователя

Страница: 25 / 55

24
Maintenance and Field Adjustment
Hose Strainer Depth Setting
The hose strainer depth is either set by a
buoyant float inside the strainer or chained up
at a specific depth. If the hose strainer is not
tied up using the attached chain, the water will
enter the hose approximately 1.5 to 2 feet (0.45
to 0.6 meters) above solid bottom of the pond.
In some cases, the hose strainer depth will
need to be chained up to a higher level in the
water.
Hose Strainer Depth Adjustment
TOOLS RECOMMENDED:
Tape Measure
STEP 1: Determine the new hose strainer
setting after consulting with a SolarBee service
team member.
STEP 2: Use the tape measure to determine
how deep the pond at the SolarBee unit.
STEP 3: Locate the white float ball that is on
one of the floats. This float ball marks the
chain that is attached to the submerged hose
strainer.
STEP 4: If the strainer is suspended by the
buoyant float and not tied up by the chain,
the strainer is approximately 1.5 to 2 feet
(0.45 to 0.6 meters) above the solid bottom.
If the strainer is tied up, let it loose so it is
suspended by the buoyant float. Use the depth
measurement made in Step 2 to determing how
deep the strainer is.
STEP 5: Lift the chain up until the strainer is at
the desired setting and tie off to the float plate.
Pond Depth
1.5 to 2.0 feet
(0.45 to 0.6 m)
Strainer Free Floating, Not Tied Up
White Float Ball
Strainer Chained Up, Not Free Floating