45
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
Secondary DNS Server
Enter the secondary DNS server IP address here.
HTTP (Web Confi gurator)
Enable Secondary HTTP Port
Here you can confi gure an additional HTTP port that can be used to access the
Web confi gurator.
Enter a number in the port number fi eld.
Jumbo Frames
Jumbo Frames improve network performance. Jumbo Frames require a 1 Gbps
(Gigabit Ethernet) network that must also support Jumbo Frames. Set the
largest possible frame size that is supported by all network devices (network
cards in computers as well as switches, hubs and routers).
When the Jumbo Frames function is activated, you can choose between a 4 KB,
8 KB and 9 KB frame size.
PLEASE NOTE!
If you activate the Jumbo Frames function on an NAS server in a
network that does not support this, you will lose access to the NAS
server. If this occurs, you will have to reset the NAS server to the
factory settings.
Network Diagnostic Tool
Use this function to test the network connection to a specifi c IP address or
domain. Select an address or enter one in the entry fi eld. Then click on “
Ping
”
to send a packet from the NAS server to the network connection.
•
Successfully pinged host
– The NAS server was able to “ping” the
NAS server, the network connection is available.
•
Unable to ping host
– The NAS server was unable to “ping” the host,
the host could not be found.
Apply
Here you can save the TCP/IP confi guration. Click on
Apply
to restart the NAS
server and save the settings. Wait until the log in screen appears or the NAS
server has booted completely and then use the NAS Starter Utility to fi nd the
NAS server in the network.
Reset
Here you can restore the previously saved settings.
86407 EN ALDI AUS RC1 Content.indd 45
86407 EN ALDI AUS RC1 Content.indd 45
04.11.2011 09:23:18
04.11.2011 09:23:18
