Medical Vcare a Series страница 22 Скачать руководство пользователя

Страница: 22 / 60

•

The collection canister is properly installed according to Disposable canister

installation section in this manual.

•

The wound dressing is properly applied according to Setup for wound dressing

application section in this manual.

•

When connecting the Vcare



to its mobile stand make sure it is properly

connected according a clicking sound is heard.

1. Use a suitable external power adapter to connect the Vcare



unit (via the electric

receptacle) to the wall electrical outlet.

When connecting the unit to the external power adapter, the operator should be

facing the back of the device, in front of the power electrical outlet.

Warning: The External power adapter must follow the specifications detailed

in the External power adapter specifications section in this manual.

Warning: Do not connect the unit to a damaged external power adapter.

Note: In order to work in Battery mode, make sure that power adapter is not

connected.

Warning: The internal battery is not accessible for users. In case that battery

malfunction is suspected during warrantee period, contact IVT Medical Ltd.

The Power indication LED is lit

2. Turn the Vcare



unit on using its power switch button located on the left side of the

unit.



When turning the device on, the operator should face the power switch on the left

side of the device.



During treatment parameter settings and vacuum operation, the operator should

face the front side of the Vcare



unit (in front of the screen and control panel).

3. Main screens

3.1. Opening screen

As the unit is turned on, an opening screen is displayed for approximately 10

seconds. The first line displays the caption

IVT Medical Ltd.

and the second line

displays

Vcare Alpha

Содержание Vcare a Series





























































Результаты поиска

Содержание Vcare a Series

Отзывы:

Похожие инструкции для Vcare a Series

Бренды по названию

Популярные бренды

Medical Vcare a Series, Руководство пользователя

Результаты поиска

Содержание Vcare a Series

Отзывы:

Похожие инструкции для Vcare a Series

Бренды по названию

Популярные бренды