Customer Service 1-888-707-1880
Dyaco Canada Inc. 2015
Email:
39
crank rotation which we use to determine crank position.
2. MW will show: ANGLE 0 REED 0
a.
When sensors operate correctly: rotate the crank and the Angle
reading will show pedal RPM measurement and the Reed will change
from 0 to 1 once per pedal revolution.
iii.
Crank Position Cali
1. Software calibration to set the position of the right pedal at 12 o’clock.
2. Set right pedal to 6 o’clock position then press start.
3. Rotate the right pedal clockwise until the console beeps.
iv.
Watts Calibration (Factory use only)
v.
Unit Type
1. Selects Upright bike (MU100) or Recumbent bike (MR100).
Error Messages
1. EEPROM Error – Solution for this is to replace the console (Note: this is the only error
message)
Specifications:
Dimensions
: Length = 57” (145cm), Width = 30” (77cm), Height = 51” (130cm)
Weight:
185.9 lbs. (84.5 kg)
Patient weight capacity:
440 lb. (200 kg)
Power:
90-240V ~: 50/60 Hz: 1.76–0.71A
Fuse Rating:
Replace with only 5A, 250V glass fuse.
Resistance:
Constant and Isokinetic with 50 levels of effort.
Work Load:
5 watts up to 750 watts.
Readouts:
Time and Segment time remaining, RPM, Watts (Left and Right), METs, Symmetry
Index, Heart Rate, Calories, Work Level
Certifications:
TUV listed to UL 60601-1 CAN/CSA-C22.2 No. 60601-1:08 CE conformity to
EN 60601-1 EMC, Compliance to EN 60601-1-2
Classification:
Class I measuring, Type B, ordinary equipment, continuous operation. This
product is classed as ordinary equipment according to IEC/EN/UL60601-1.
Disposal:
Reference should be made to local regulations concerning the disposal of this product at
the end of useful life.
Manufacturer:
Dyaco International Inc.
12F, No.111, Songjiang Rd.
Taipei 104, Taiwan R.O.C.
Authorized European Community Representative:
Dyaco Germany Inc.
Hopperheider Weg
51467 Bergisch Gladbach
Tel.: +49 (0) 2202 9816500
