Medias N-06C, Инструкция по эксплуатации

Страница: 45 / 179

43
Getting Started
Charging with the microUSB cable
for PC connection
You can charge your FOMA terminal by
connecting the FOMA terminal and a PC
with the microUSB cable for PC connection
(sample).
Surface with engraved
mark upwards
microUSB cable for
PC connection (sample)
Open the external
connector terminal cover
1
Open the external connector
terminal cap (P. 29), and plug
the microUSB plug of the
microUSB cable for PC connection
horizontally into the external
connector terminal of the FOMA
terminal
• Insert the microUSB plug horizontally
with the engraved side facing up.
2
Insert the other USB plug of the
microUSB cable for PC connection
horizontally into the PC USB port
3
When charging is completed,
remove the microUSB plug
horizontally from the FOMA
terminal and close the external
connector terminal cover (P. 29)
4 Remove the USB plug
horizontally from the PC USB
port
NOTE
⿟
Notification LED turns red while charging, green
when the battery level is over 90%, and off when
charging is complete.
⿟
When you begin charging, such as when the
battery is depleted, the notification LED may not
immediately light. However, charging has
started.
<Desktop holder>
⿟
If the FOMA terminal is turned off when placed
in the desktop holder to charge, the power turns
on.
<DC adapter>
⿟
The DC adapter takes a 2A fuse. If the fuse (2A)
blows, be sure to replace with a designated fuse.
The fuse (2A) is a consumable and can be
purchased at a local car dealer.