Medias N-06C, Инструкция по эксплуатации

Страница: 142 / 179

140
Using Overseas
After returning to Japan
When you return to Japan, the FOMA
terminal automatically connects to the
FOMA network. If it is unable to connect,
change the following settings.
⿟
Set "Network Mode" to "WCDMA/GSM
auto".
→
P. 140
⿟
In the settings of "Network operators", set
"Available networks" to "Select
automatically".
→
P. 140
Network Settings for Use
Overseas
Your FOMA terminal is configured to
automatically detect and switch the
network mode, operator, etc. by default,
but you can also manually switch.
1
From the Home screen,
m
▶
"Setting"
▶
"Wireless &
networks" ▶ "Mobile networks"
■ Configuring Network Mode
▶
"Network Mode"
▶
select any item:
WCDMA only
······Uses 3G network.
GSM only ······Uses GSM network.
WCDMA/GSM auto ······Automatically
switches to network that can be connected
to.
■
Setting an operator
▶
"Network operators"
▶
"Select
automatically" or tap the network of the
operator you want to use
• The operator names that are displayed
vary depending on the setting of the
"Network Mode".
■
Enabling data roaming
▶
Mark the "Data roaming" checkbox
▶
"OK"
■
Switching access points
→
P. 140
Switching access points
If an access point is set to "mopera U ( スマー
トフォン定額
) (Smartphone flat-rate)", you
must switch the access point to use the
network overseas.
⿟
If an access point is set to "sp モード ", you can
use the access point without any changes.
1
From the Home screen,
m
▶
"Setting" ▶ "Wireless &
networks"
▶
"Mobile networks"
▶ "Access Point Names"
2
m
▶
"New APN"
3
"Name" ▶ enter the name of the
network profile to create
▶
"OK"
4
"APN"
▶
enter "mopera.net"
▶
"OK"