Media5 Mediatrix 4116, Руководство по установке оборудования

Страница: 25 / 60

Indicators (LEDs) Hardware Installation Guide
Mediatrix 4100 – Analog Access Device 15
Special Vocal Features
When entering special characters on your telephone pad, the Mediatrix 4100 talks back to you with relevant
information.

To access special vocal features:
1. Take one of the telephones connected to the Mediatrix 4100.
2. Dial one of the digits sequence on the keypad.
Verifying the Installation
There are a few ways to verify that the Mediatrix 4100 is properly connected to the IP network and is working:

By contacting it with a SNMP browser

By contacting it via the CLI

By contacting it via a web browser

By pinging it
These procedures assume that you know the IP address of the Mediatrix 4100 you want to verify. If the
Mediatrix 4100 does not respond, do the following:

Verify that the LAN and WAN cables are securely connected to the Mediatrix 4100 and to the
network connectors.

Be sure that you did not connect crossover network cables.

Verify the state of the IP network to ensure it is not down (the LAN LED should be ON or
blinking).
Indicators (LEDs)
The indicators (LEDs) of the Mediatrix 4100 are described in “Mediatrix 4100 Connectors and Indicators” on
page 2 .
LED Patterns – Specific Conditions
Table 8 describes the different states a Mediatrix unit can have and their associated LED patterns.
Table 7: Special Vocal Features
Digits to Dial Information Vocally Sent by the Mediatrix 4100
*#*0 Current IP address of the Mediatrix 4100 (static or DHCP).
*#*1 MAC address of the Mediatrix 4100.
Table 8: LED Patterns
Condition Description LED Pattern
RestartPending Triggered when the RESET/DEFAULT button is
pressed in the ResetPending state. The unit
prepares for a physical shutdown and restart.
Power LED:
• blinking, 1Hz, 50%
duty
All other LEDs:
• OFF
RecoveryPending Triggered when the RESET/DEFAULT button is
pressed at start-time or for at least 7 seconds.
All LEDs:
• blinking, 1Hz, 50%
duty