Media5 Mediatrix 4116, Руководство по установке оборудования

Страница: 18 / 60

Chapter 2 - Installation Required Mounting Tools and Equipment
8 Mediatrix 4100 – Analog Access Device
Required Mounting Tools and Equipment
You will need the following tools and parts to properly install the Mediatrix 4100:

Screwdriver as required for attaching brackets to rack or wall.

Philips screwdriver for attaching brackets to the Mediatrix 4108/4116/4124.

Screws and anchors for wall-mounting, if required.
• Four wood screws or other fasteners, for installing the chassis on a wall.

ESD-preventive wrist strap.
In addition, you might need the following external equipment:

Modem for remote access.

RJ-45 cables for the WAN and LAN connections.
Unpacking and Inspection
If you haven’t already done so, unpack the Mediatrix 4100 device. Carefully remove it from the package and
packing material. The Mediatrix 4100 package contains the following items:

1 x Mediatrix 4100 unit

1 x power cord for the country in which you are using the Mediatrix 4100

2 x rack-mounting brackets

1 x Bumpon
TM
kit for desktop use

1 x Quick Start booklet

1 x Printed Flyer

1 x Warranty Card
You may also need additional 10/100 BaseT Ethernet RJ-45 cables.
Location and Mounting Requirements
The Mediatrix 4108/4116/4124 is suitable for use in an office environment where it can be placed in the same
room or cabinet where the PBX/telephony equipment is located. The unit can be mounted on a standard 48.26
cm (19 in.) equipment rack.
Location
Install the Mediatrix 4100 in a well-ventilated location where it will not be exposed to high temperature or
humidity. Do not install the Mediatrix 4100 in a location exposed to direct sunlight or near stoves or radiators.
Excessive heat could damage the internal components.
When deciding where to position the Mediatrix 4100, ensure that:

The Mediatrix 4100 is accessible for future upgrade, maintenance and troubleshooting, and
cables can be easily connected.
Warning:
The analog lines of the Mediatrix 4100 are not intended for connection to a telecommunication
network that uses outside cable.
Warning:
To prevent fire or shock hazard do not expose the unit to rain or moisture.