Appendix B - Cabling Considerations
RJ-11 (Telephone) Cable
32
Mediatrix 4100 – Analog Access Device
RJ-11 (Telephone) Cable
The RJ-11 cable is commonly used for telephone connection.
Wiring Conventions
For telephone connections, a cable requires one pair of wires. Each wire is identified by different colours. For
instance, one wire might be red and the other, red with white stripes. Also, an RJ-11 connector must be
attached to both ends of the cable.
Each wire pair must be attached to the RJ-11 connectors in a specific orientation. The following figure
illustrates how the pins on the RJ-11 connector are numbered. Be sure to hold the connectors in the same
orientation when attaching the wires to the pins.
Figure 11:
RJ-11 Connector Pin Numbers
The RJ-11 pair of wires is wired so that pins 3 and 4 are connected to the Ring and Tip, which meets the
following requirements:
EIA/TIA-IS 968
CS-03 Issue 8, Part III requirements.
Caution:
Do not plug a phone jack connector into an RJ-45 port.
Table 15:
RJ-11 Pinout Information
Pin #
Function
1
Not used
2
Not used
3
Ring
4
Tip
5
Not used
6
Not used
Warning:
The RJ-11 cable should comply with UL 1863 and CSA C22.2 No 233 standards.
Содержание Mediatrix 4116
