Media5 Mediatrix 4116, Руководство по установке оборудования

Страница: 13 / 60

Mediatrix 4100 Connectors and Indicators Hardware Installation Guide
Mediatrix 4100 – Analog Access Device 3
Rear Connectors
The Mediatrix 4108/4116/4124 models do not have rear connectors except for the IEC320-C14 Power Cord
Receptacle. This power cord supplies an internal Switching Mode Power Supply (SMPS) Universal input. The
power supply range is 100 – 240 VAC; 50/60 Hz; 1.6 A.The Mediatrix 4100 has several connections that must
be properly set. The following describes these connections for the various Mediatrix 4100 models.
Figure 2: Mediatrix 4108/4116/4124 Rear Panel Connectors
4. FXS
connectors Eight RJ-11 connectors to attach conventional telephones or G3 fax machines.
These connectors are available on the Mediatrix 4108 and Mediatrix 4116 only.
5. Bypass Permits users to make and receive calls even when the Mediatrix 4100 is not
operating.
6. Ready LED When lit, the Mediatrix 4100 is ready to initiate or receive a call. The unit does not
have to be registered to a server.
7. In Use LED When lit, at least one of the FXS lines is in use.
8. LAN LED Provides the state of the network connected to the Ethernet connector.
9. Power LED When lit, power is applied to the Mediatrix 4100.
10. Reset /
Default
button Resets configuration parameters of the Mediatrix 4100 to default (known) values. It
can be used to reconfigure the unit. See
“RESET/DEFAULT Button” on page 17
for more details.
Table 6: Mediatrix 4108/4116/4124 Front Connectors and LEDs (Continued)
Connector
/ LED
Description
Standards Supported • ITU-T I.430 Basic user-network interface - Layer 1
specification (section 9).
Rack-mounting
bracket
Universal Power Supply Unit