Management Choices
Hardware Installation Guide
Mediatrix 4100 – Analog Access Device
19
Factory Reset
The Factory reset reverts the Mediatrix 4100 back to its default factory settings. It deletes the persistent MIB
values of the unit, including:
The firmware pack download configuration files.
The SNMP configuration, including the SNMPv3 passwords and users.
The PPPoE configuration, including the PPP user names and passwords.
The Factory reset creates a new configuration file with the default factory values. It should be performed with
the Mediatrix 4100 connected to a network with access to a DHCP server. If the unit cannot find a DHCP
server, it sends requests indefinitely.
To trigger the Factory Reset:
1.
Power the Mediatrix 4100 off.
2.
Insert a small, unbent paper clip into the
Reset / Default
hole located at the front of the Mediatrix
4100. While depressing the
Reset / Default
button, restart the unit.
Do not depress before the LEDs stop blinking and are steadily ON.
3.
Release the paper clip.
The Mediatrix 4100 restarts.
This procedure resets all variables in the MIB modules to their default value.
When the Mediatrix 4100 has finished its provisioning sequence, it is ready to be used with a DHCP-
provided IP address and MIB parameters.
This procedure can also be performed at run-time.
Management Choices
Congratulations for properly installing the Mediatrix 4100. You can now configure the software parameters of
the unit.
The Mediatrix 4100 offers various management options. All these options are described in the
Dgw v2.0
Software Configuration Guide
.
Note:
The Factory reset alters any persistent configuration data of the Mediatrix 4100.
Table 11:
Management Options
Management Choice
Features
Web GUI
The Mediatrix 4100 web interface allows you to configure the following information:
•
Network attributes
•
SIP parameters
•
VoIP settings
•
Management settings such as configuration scripts, restore / backup,
etc.
SNMPv1/2/3
The Mediatrix 4100 SNMP feature allows you to configure all the MIB services.
Command Line
Interface (CLI)
The Mediatrix 4100 CLI feature allows you to configure all the MIB services.
Unit Manager
Network
The UMN offers the following:
•
Auto-discovery
•
Group provisioning
•
SNMP access and remote management.
Содержание Mediatrix 4116
