background image

MediCap

®

 USB200 User Guide – English 

 

15 of 20 

USB200H-UG01-EN-140120-MC 

Volume Menu 

The Volume Menu allows you to set the system volume (this affects the internal speaker 

and

 the 

audio output to an external speaker).  When using an external speaker, it is recommended that you 
leave this setting at a medium volume and use the volume controls on the external speaker to adjust 
the volume levels. When troubleshooting audio issues, please note the following: 

  Live audio will be output during video recording, but will be mute while reviewing recorded 

videos on the USB200. To review audio, transfer the recorded video to a computer and play 
the video there. 

  The Audio Input jack on the USB200 is designed to be connected to a microphone (not 

included) or the audio output on a medical device (for example, an ultrasound). 

  The Audio Output jack on the USB200 is designed to be connected to an external 

powered

 

speaker (not included) or the audio input on a medical device (for example, an ultrasound). 
(Note: A 

powered

 speaker contains its own amplifier that is powered via batteries or an 

electrical outlet.) 

  Audio recording is always active. To record audio you can simply connect an audio source as 

shown on page 7. If you will not be recording audio, do not connect an audio source. 

  The audio recording format is shown in the “Specifications” section on page 19. 

  Adapters (not included) may be required to connect with the Audio Input and Output jacks. 

  If the audio on the external speaker is distorted, try lowering the volume level in the Volume 

Menu and increasing the volume level using the volume control on the external speaker. 

  If the audio on the external speaker is too low (even when the volume control on the external 

speaker is set to full volume), try increasing the volume level in the Volume Menu. When 
increasing the volume levels in this menu, do so in small increments and test the effect on the 
external speaker. 

Excessively high volume levels in this menu may cause problems with some 

models of external speakers.

 

Transferring Images to Your Computer 

1.  Insert the USB flash drive containing captured images into a USB connector on your computer. 

2.  The computer will manage the flash drive just like any other drive on your computer. Navigate 

to the drive and open it so you can see the folders it contains. 

3.  You can now click on the images and videos to review them while they are on the flash drive, or 

you can move them to your computer's hard drive and review and store them there 
(recommended). 

Note:

 Refer to Windows or Mac OS documentation for information on how to access drives on 

your computer and manage files. 

Viewing Still Images on Your Computer 

You can easily view the recorded images that you have transferred to your computer. Windows and 
Mac computers provide built-in viewing software that will open automatically when you double-click 
on an image file. You can also view and edit your still images using specialized medical image 
management programs available from many third-party vendors. 

Viewing Videos on Your Computer 

The USB200 records video in H.264 format, sometimes referred to as MPEG-4 or MP4. This widely 
used format is ideally suited to medical applications because it delivers the highest quality picture in a 
compact file size. Most Windows and Mac computers provide built-in viewing software that will open 
automatically when you double-click on an H.264 video file. However some older computers may 
need additional codecs to play H.264 videos. If your videos will not play, search the internet for an 
H.264 codec and install it on your computer. 

Содержание MediCap USB200





















Отзывы: