6
INSTALLATION
1.Comfort Zone is a replacement mattress. Place the mattress directly on the bed frame, with the air hose connectors
positioned at the footboard.
2.Hang the pump onto the bed board (footboard side) using the hooks on back of the pump, or place it on a flat surface.
3.Connect air hose connectors from air mattress to the pump unit. Ensure the air hoses are not kinked or tucked
under the mattress.
4.Plug the power cord into the electrical outlet.
5.Turn the power ON.
WARNING!
•
Make sure the pump unit is suitable for the local power voltage.
•
Do not position the equipment so that it is difficult to disconnect the plug.
MATTRESS & COVER
The mattress is a 8” cell-on-cell type mattress which prevents bottoming out in case of a sudden power outage.
The mattress will temporarily retain air even when the pump is turned off or during a power outage.
Please note this only temporary.
The cover sheet protects the cells against unexpected contamination, and makes cleaning of the mattress easier.
BEFORE USE
Check the correct assembly, paying particular attention to the air hoses connector.
USE WARNINGS
1. Electric shock - Avoid electric shock
It is very dangerous to use electric products (here is control unit) improperly or damaged ones.
1) Unplug the pump control unit if you will not use it for a long time.
2) Do not use the pump control unit near water or any other fluid.
3) Avoid having the cable, plug and main control unit being in contact with water or any other fluid.
4) Unplug the pump control unit if or when it is in contact with water or other fluid.
Do not open the control unit by yourself. This should only be done by an authorized technician.