Mecmesin MultiTest 0.5-dV, Руководство по эксплуатации

Страница: 33 / 52

MultiTest -dV Operating Manual
Mecmesin
 33
Setting Options
Start Direction Choose whether the test direction is upward or downward.
Move to Start Select if the test moves to the start position first.
Example
Upper displacement:
+10 mm
Lower displacement: –
20 mm
Initial stroke
: Up
Move to Start: Yes
Unless already at -20 mm the crosshead will first travel to that point. The stand will then
move to 10 mm above tared zero, followed by a final movement back to -20mm.
AFG Control/Force Control
The AFG control test operation consists of two main functions:

AFG Control - Control of the test stand using the AFG’s limit or break settings,

Force Control - Control of the test stand using the front panel to program limit,
break or cycle settings,
Within AFG Control/Force Control there are four subtests:
Sub-Test Description
AFG Control
Move in a set direction until a force limit or break condition is hit
and then stop. Configured using the AFG.
Force Limit
Move in the configured direction until a force limit is hit and then
stop. Configured using the front panel.
Force Cycle
Cycle between a limit force and a return force. Configured using
the front panel.
Break
Move in the configured direction until a break condition is detected.
Configured using the front panel.