Mec 34-J Diesel, Руководство по обслуживанию и запасным частям

Страница: 68 / 272

Page 62 34-J Desel - Servce & Parts Manual
December 2021 Secton 17 - Calbraton Troubleshootng
REDO EMPTY:
This message is displayed if the EMPTY phase of load calibration has previously been
completed.
Press ENTER when “NO” is displayed if there is no need to redo the EMPTY phase.
Press UP or DOWN to display “YES” then press ENTER if it is necessary to redo the
EMPTY phase.
If the previous EMPTY calibration was in error, or if the pressure sensor is replaced, it will be
necessary to redo the EMPTY phase.
REDO LOADED:
This message is displayed if the LOADED phase of load calibration has previously been
completed.
Press ENTER when “NO” is displayed if there is no need to redo the LOADED phase.
Press UP or DOWN to display “YES” then press ENTER if it is necessary to redo the
LOADED phase.
If the previous LOADED calibration was in error, or if the pressure sensor is replaced, it will be
necessary to redo the LOADED phase.
TOTAL DATA:
This message is displayed at the end of each phase, to confirm the number of measurements
recorded by the GP500. No operator input is required during this process.
•
•
•
•
•
•
•
•
•
•
•