manualshive.com logo in svg

Mec 34-J Diesel, Руководство по обслуживанию и запасным частям

Поделиться
Скачать
Mec 34-J Diesel Скачать руководство пользователя страница 110

Page 104

34-J Desel - Servce & Parts Manual

December 2021

Secton 19 - Troubleshootng

Calibration Related Messages

The following messages appear when the GP500 microprocessor has not been calibrated or was 
improperly calibrated.

FACTORY OVERRIDE_________________________________ FAST FLASH

GP500 is shipped in this condition to allow temporary operation of the machine without 
interruption from the safety system so that calibration procedures can be performed. The 
GP500 must be prepared for the machine to which it will be installed, including calibration and 
Customer/ model selection. See “GP500 Setup” for instructions. Once Calibrated, Factory 
Override is gone forever.

ALL SAFETY SETTINGS ARE INACTIVE WHEN THE GP500 IS IN 
FACTORY OVERRIDE, NEVER OPERATE MACHINE IN FACTORY 
OVERRIDE EXCEPT TO CALIBRATE THE GP500�����

NOT CALIBRATED__________________________________ Flash Code: 1/1

The GP 500 microprocessor has not been calibrated. Operation will be restricted until calibration 
is completed. Refer to “Set up procedures” in this section for calibration information and 
instructions.

HEIGHT NOT CALIBRATED___________________________ Flash Code: 1/1

The Height portion of the calibration has not been completed. Operation will be restricted until 
calibration is completed. Refer to “Set up procedures” in this section for calibration information 
and instructions.

FUNCTIONS LOCKED - NOT CALIBRATED______________ Flash Code: 1/1

The GP 500 microprocessor has not been calibrated. Operation will be restricted until calibration 
is completed. Refer to “Set up procedures” in this section for calibration instructions.

FAULT: CUSTOMER_________________________________ Flash Code: 1/1

Customer vs. Model settings not correct. Using the EZ-Cal, go to SETUPS/CHANGE 
DEFAULTS/CUSTOMER to correct. Changing customer or model will require access level 1 
code. NOTE: all adjustments and settings return to default value when Customer or Model is 
changed, ensure proper settings and adjustments after changing Customer or Model.

•

•

•

•

•

Содержание 34-J Diesel

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды