manualshive.com logo in svg

Mec 34-J Diesel, Руководство по обслуживанию и запасным частям

Поделиться
Скачать
Mec 34-J Diesel Скачать руководство пользователя страница 51

Page 45

34-J Desel - Servce & Parts Manual

December 2021

Deutsch Connectors

Deutsch connectors used on MEC equipment are designed so that individual parts may be replaced 
without replacing the entire component. Special tools and detailed instructions are provided in 
Deutsch Connector field kits, MEC part no. 84091.

Male Plug Connector

Use the flat end of the Removal Tool or a flat blade 
screwdriver to pry the locking wedge from the 
connector, taking care not to damage the Sealing 
Gasket.
Inspect and replace damaged parts.
Replace or re-crimp wires and contacts.

Female Receptacle Connector

Use the notched end of the removal tool or a wire 
hook to pull the locking wedge from the connector.
Replace worn or damaged parts.
Replace or re-crimp wires and contacts.

Locking Fingers

Remove the locking wedge as outlined above.
Using the removal tool or a flat blade screwdriver, 
push the Locking Fingers aside to release the 
contact.
Pull the wire and contact out of the connector.

Heavy Duty Plug

Slide the removal tool along the wire to be replaced 
and push into the connector to release the contact.
Pull the wire and contact out of the plug.

Crimping

Strip 1/4 in. (6 mm) insulation from the wire.
Insert the contact into the crimping tool and insert the 
stripped wire into the contact making sure no wires 
are outside the contact barrel.
Close the handles of the crimping tool, then release 
the handles to remove the crimped contact.

•

•
•

•

•
•

•
•

•

•

•

•
•

•

ART_2041

Deutsch Connector Field Kit

MEC part # 84091

Deutsch Connectors

Secton 14 - Deutsch Connectors

Содержание 34-J Diesel

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды