manualshive.com logo in svg

Mec 34-J Diesel, Руководство по обслуживанию и запасным частям

Поделиться
Скачать
Mec 34-J Diesel Скачать руководство пользователя страница 20

Page 14

34-J Desel - Servce & Parts Manual

December 2021

Secton 9 - Transportng and Lftng Instructons

Transportation Instructions

Safety Information

This section is provided for reference and does not supersede any 
government or company policy regarding the loading, transport or lifting 
of MEC machinery�����

Truck drivers are responsible for loading and securing machines, and 
should be properly trained and authorized to operate MEC machinery����� 
Drivers are also responsible for selecting the correct and appropriate 
trailer according to government regulations and company policy����� Drivers 
must ensure that the vehicle and chains are strong enough to hold the 
weight of the machine (see the serial number plate for machine weight)�����

ONLY properly trained and qualified operators shall load and unload this 
machine�����

Free-wheel configuration for Winching or Towing�����

RUNAWAY HAZARD!

After releasing the brakes there is nothing to stop machine travel����� 
Machine will roll freely on slopes�����

ALWAYS chock the wheels before manually releasing the brakes�����

The machine can be winched or towed short distances at speeds not to exceed 5 MPH (8 km/h). 
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes after 
towing or winching.

The machine can be winched or towed short distances at speeds not to exceed 5 MPH (8 km/h). 
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes after 
towing or winching.

Art 5598

Hand Pump

Pressure

Control

Valve

Release Valve

Disengage Brakes before Towing or Winching

Chock the wheels.
Push and hold the black button on the Brake Release 
Valve.
Press the red button on the Hand Pump valve 8-10 times 
until there is firm resistance and the brakes release.

Engage Brakes before Driving

Manually by pulling the black button out on the Brake 
Release Valve, or
Automatically by engaging the drive function.

•
•

•

•

•

Note:

Brakes will reset automatically when drive function is activated.

Содержание 34-J Diesel

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды