93075
Page 31
4069 RT
April 2014
4069 RT
Machine Inspections
Pre-Start Inspection Checklist
The operator must conduct a Pre-Start Inspection of the machine before each work shift.
DO NOT use a damaged or malfunctioning machine.
Initial
Description
_______
Check that the operator’s manual and manual of responsibilities are in the storage container located on the platform.
_______
Perform a visual inspection of all machine components. Look for missing parts; torn or loose hoses; hydraulic fluid
leaks; loose, torn or disconnected wires; damaged tires; etc.
_______
Check all structural components of the machine for cracked welds, corrosion and collision damage.
_______
Check all hoses and the cables for worn or chafed areas.
_______
Check the platform rails and personnel entry for damage or modification. Check for missing spring pin retainers.
_______
Check that all warning and instructional decals are present, legible and secure.
_______
Check the tires for damage.
_______
Check that all structural components, pins and fasteners are present and properly tightened.
_______
Check for fluid leaks.
_______
Check hydraulic fluid level (check with platform fully lowered).
_______
Check that battery is clean and secure. Check terminals for proper tightness. Check for corrosion.
_______
Check engine coolant level in coolant recovery bottle.
_______
Check engine oil level.
_______
Secure all covers, panels and guard rails.
_______
Ensure that the personnel entry is properly closed and secured before operating the machine.
Consult the Kubota engine manual for details regarding other engine checks and change intervals for filters and fluids.
