Page 10
93075
April 2014
4069 RT
4069 RT
Controls & Components
Lower Controls
ALWAYS be aware of the machine’s position and of your surroundings
before activating any control function.
CONTROL
DESCRIPTION
1
Emergency Stop Switch
Press the EMERGENCY STOP switch at any time to stop all machine functions.
Turn switch
clockwise
to reset.
2
Platform Lift Button
Press this button to lift the platform.
3
Platform Lower Button
Press this button to lower the platform.
4
Selector Switch
PLATFORM
Select to operate from the platform control panel.
BASE
Select to operate from the base control panel.
OFF
Select to stop operation from either control panel.
5
Hour Meter
Indicates total elapsed time of machine operation.
6
Glow
Operate when starting in cold start conditions.
7
Emergency Down Switch Move this switch down to lower the platform in the event of an emergency or power loss.
8
Circuit Breaker
Trips when there is excessive electrical load. Push to reset.
9
Start Button
Press to start engine. Release when engine starts.
10
Start Delay Light
Prevents over-cranking of engine. When lit, starter is disabled. After approximately 35 seconds
the light will go out and starter will operate.
ART_4399
7
8
6
9
10
2
3
4
5
1
