Technical Manual
Blind Push Button Smart 55
BE-JTA5504.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
49
49
4.5.3 Times/Locks
4.5.3.1 Switching times
Up to 8 switching times and other settings can be individually configured for the time switch.
The switching times can be set via a table format:
Figure 31: Settings – Switching times 1-8
For each of the 8 switching times you can set on which days of the week they should be active.
The following modes are available:
Time:
The action for this time switch is executed at a fixed time.
Sunrise / Sunset / Dawn / Dusk:
The action for this switching time is executed at the corresponding event. In addition, conditions can
be defined for this. For example, the time can be shifted forwards/backwards by a fixed time via the
condition "
Time shift
".
The action can be further restricted with the condition "latest at…"/"earliest at…"
Example:
This function would be performed at sunrise, but not later than 8 am.
Random:
The action for this time switch is carried out in a period at a specified time. The randomness is
specified as a condition (e.g. +/- 60min) at this time.
The "
Selection
" parameter defines via symbols whether adjustable values are possible for "height
only", "slats only" or "height and slats". According to the setting, the dropdown fields for defining the
values then appear next to it in the columns "
Position
" and "
Slats
".
