MDT Technologies SCN-RT2UP.01, Руководство пользователя

Страница: 13 / 57

Technical Manual Temperature Controller
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 •
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de •
www.mdt.de
13
25 Channel 1 DPT_RHCC
DPT 22.101 send Controller sends
current state Visu, Display,
Control keys,
Diag osti …
Communication object is
always shown when the
controller is active.
26 Channel 1 Mode selection
DPT 20.102 receive/
send Controller
switches
operating mode
and send its
current state
when the
parameter is set Visu, Display,
Control keys,
Central operation
unit Communication is alway
shown when the controller is
active. Via the parameter
“e d status o o je t –
Mode sele tio , the se di g
of this object can be activated
and directly evaluated from
visualizations or homeserver.
28 Channel 1 Flow temperature limit
DPT 9.001 receive Controller limits
the flow
temperature Visu, Display,
Control keys,
Central operation
unit Communication is only shown
i fit was activated in the
general settings.
30 Channel 1 Error temperature
sensor
DPT 1.001 send Controller sends
an error of the
external sensor Visu, LED-Display,
Diagnostic
…
Communication object is
shown when the parameter
i te al/e te al se so is
set at least to 10% external
sensor.
+33
next Channel
Table 1: Overview communication objects