SCN-RT6REG.01
SCN-RT6AP.01
SCN-RT2UP.01
SCN-PTST3.01
MDT Temperature Controller
MDT Temperature Controller 6-fold, MDRC
MDT Temperature Controller/Sensor 6-fold, surface mounted
MDT Temperature Controller/Sensor 2-fold, lush mounted
Version
SCN-RT6REG.01
Temperature Controller 6-fold
2SU MDRC
SCN-RT6AP.01
Controller/Sensor 6-fold
Surface mounted, for PT1000 sensors up to 12m cable length
SCN-RT2UP.01
Controller/Sensor 2-fold
lush mounted, for PT1000 sensors up to 12m cable length
SCN-RT4UP.01
Controller/Sensor 4-fold
lush mounted, for PT1000 sensors up to 12m cable length
Accessories SCN-RT6AP.001
SCN-PTST1.01
PT 1000 Sensor Standard
Dimensions 4mm x 30mm, 1m cable
SCN-PTST3.01
PT 1000 Sensor Standard
Dimensions 6mm x 50mm, 3m cable
SCN-PTAN3.01
PT 1000 Sensor strap on installation Dimensions 8mm x 40mm, 3m cable
SCN-PTDE0.01
PT 1000 Sensor ceiling installation
Cut out diameter: 23mm, Depth: 28mm
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received
as an KNX object, additionally the SCN-RT6AP.01 can manage up to 6 PT1000 temperature sensors. Depending on the
adjusted parameters of the Temperature controller the actuating value is sent as 1-bit or 1-byte variable to the bus.
The characteristic of the MDT Temperature Controller (Two-position, PI and PWM control) can be set in the ETS3/4.
The thermostat stores the minimum and maximum temperature and releases an alarm telegram if the temperature differs
from the programmed limit values.
The temperature of the frost protection is parameterizable. The desired value can be given by MDT VisuControl
touchpanel or the MDT pushbuttons.
The MDT Temperature Controller Actuator REG is a modular installation device for ixed installation in dry rooms. It its
on DIN 35mm rails in power distribution boards or closed compact boxes. The Temperature Controller Actuator AP is a
surface mounted device, the maximum length of the PT1000 temperature sensors should not exceed 12m.
Both MDT Temperature Controllers are for ixed installations in dry rooms.
For project design and commissioning of the MDT Temperature Controllers it is recommended to use the ETS3f/ETS4 or
later. Please download the application software at www.mdt.de/Downloads.html
• Production in Germany, certiied according to ISO 9001
• Selectable temperature controller (PI, Two-position, PWM)
• Limit values min/max, Frost-/heat protection alarm, min/max memory
• Cyclical sending of contact state programmable
• Day-/night-/frost-/heat protection operation
• Cooling function
• Status feedback by HVAC and RHCC status objects
• Operation mode can be set via Bit/Byte objects
• Desired value can be given by visualisation, e.g. MDT VisuControl
• Integrated bus coupling unit
• 3 years warranty
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: + 49 - 2263 - 880
•
Fax: + 49 - 2263 - 4588
•
•
www.mdt.de
Stand: 0115
DIN EN ISO 9001
TAW Cert
Zert.Nr.1905606
N
