Technisches Handbuch Bewegungsmelder SCN-BWM55.x1
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
33
33
4.3 Alarm/Motion Direction
4.3.1 Alarm
The following figure shows the settings for the alarm function:
Figure 14: Settings - Alarm function
The following table shows the parameter settings for alarm detection:
ETS-Text
Dynamic range
[default value]
Comment
Active sensors
--
1-
-2
12
Setting which sensors are active for
alarm detection
Information about
placement of sensors
Parameter displays a sketch with
information about the sensors S1 and
S2
Release sensitivity for
Day/Night
1-6
[3 (Day), 2 (Night)]
Adjustment of sensitivity for triggering
the alarm in standby mode (no motion
detected)
Presence sensitivity
1-8
[6]
Adjustment of the sensitivity after a
first motion has been detected
Motion filter in
Standby
not active, no filtering
active, filter short motion
Activation of a motion detector at
standby (= output is switched off)
