ANI Monitor V1 - Continouous analgesia monitoring system
MD/PRD/IN16.ANIV1 V.10 – 29 SEP 2021
19
Never use the ANI Monitor V1 while a surgery only with the battery power. The monitor
must be plugged on electrical main supply, especially while an electrical bistoury is used.
4
Beginning the ANI monitoring
Ignite the monitor thanks to the switch in the bottom
right hand corner of the front side (figure 12).
NOTE:
if the front switch doesn’t reboot the monitor, check the green rear button is really
bright. If this power indicator is still dim, lift up the transparent shell and push on this green
button in order to power the monitor up and reboot it.
WARNING:
use this green rear push button only to power the monitor up. Never use it to
shut down the device. As a brutal stop, it could occur serious damages for next ignition and
prevent a correct use.
Front Switch
Figure 12
Rear push button
Figure 13
