MCZ MUSA 2.0 Скачать руководство пользователя

Страница: 33 / 64

I/ON

8-ELECTRICAL CONNECTION

ELECTRICAL CONNECTION

First connect the power cable to the back of the stove and then to a wall socket.

The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.

It is recommended to disconnect the power cable when the stove is not used.

The cable must never come into contact with the smoke exhaust pipe or any other part of the stove.

STOVE POWER SUPPLY

After connecting the power cable to the back of the stove, turn the switch to

(I)

The stove is then powered.

There is a fuse box also in the switch block next to the power socket. Open this compartment by simply lifting the cover, using a screwdriver

as a lever from inside the power outlet compartment. Inside there are two fuses (3.15 A delayed), which may need to be replaced if the

stove is not powered (e.g. the ON/OFF button does not go on or the control panel display does not light up) - operation to be implemented

by an authorised and skilled technician.

ELECTRICAL STOVE CONNECTION

STOVE POWER SUPPLY

STOVE SWITCH

FUSE COMPARTMENT

Содержание MUSA 2.0
































































Результаты поиска

Содержание MUSA 2.0

Отзывы:

Похожие инструкции для MUSA 2.0

Бренды по названию

Популярные бренды

MCZ MUSA 2.0, Руководство по установке

Результаты поиска

Содержание MUSA 2.0

Отзывы:

Похожие инструкции для MUSA 2.0

Бренды по названию

Популярные бренды