MCZ MUSA 2.0 Скачать руководство пользователя

Страница: 4 / 64

1-WARNINGS AND WARRANTY CONDITIONS

SAFETY PRECAUTIONS

•

Installation, electrical connection, function test and maintenance

must only be carried out by authorised and qualified personnel.

•

Install the product in accordance with all local and national legislation

and regulations in force in the region or state.

• Only use the fuel recommended by the manufacturer. The product must not be

used as an incinerator.

• It is strictly forbidden to use alcohol, petrol, liquid fuel for lanterns, diesel, bio-

ethanol, fluids for lighting charcoal or similar liquids to light/rekindle the flame

in these devices. Keep these flammable liquids well away from the appliance

when in use.

• Do not put any fuel other than wood pellets in the hopper.

• The instructions provided in this manual must always be complied with to

ensure the product and any electronic appliances connected to it are used

correctly and accidents are prevented.

• This appliance can be used by children aged 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children must not play with the

appliance. Cleaning and user maintenance shall not be carried out by

children without supervision.

• The user, or whoever is operating the product, must read and fully understand

the contents of this installation guide before performing any operation. Errors

or incorrect settings can cause hazardous conditions and/or poor operation.

• Do not climb on or lean on the product.

Содержание MUSA 2.0
































































Результаты поиска

Содержание MUSA 2.0

Отзывы:

Похожие инструкции для MUSA 2.0

Бренды по названию

Популярные бренды

MCZ MUSA 2.0, Руководство по установке

Результаты поиска

Содержание MUSA 2.0

Отзывы:

Похожие инструкции для MUSA 2.0

Бренды по названию

Популярные бренды