MCZ MUSA 2.0, Руководство по установке

Страница: 38 / 64

MAN
12:02
31
MAX
°C
TU
12:03
31
°C
TU
35
°C
AUTO
36
11-REMOTE CONTROL MAX
REMOTE CONTROL OPERATION
General rules
By pressing key A for 1” the product is switched on and off. Key C is used to make all changes. Key E is used to confirm the changes. By
pressing key B one selects the product operating mode. Via key D one browses the FAN and SLEEP setting. Whichever the mode is, press
key A briefly (or leave the keypad idle for 7”) to go back to the initial display.
INITIAL SETTINGS
Setting the time
Both with the remote control on and off, by pressing keys B + E at the same time for 3” one accesses the time/day setting mode.
The hour digits will start to flash; they can be changed with key C . By pressing key E the changes are confirmed.At this point the minutes
digits will start to flash.
Follow the same modify/confirm procedure, one will then go onto the time display mode (12h or 24h) and finally
the day will start to flash. Confirm this data to exit the settings.
NOTE: each time the remote control is powered, the time is reset and the display automatically enters the time setting mode.
°C – °F setting
Only with the stove switched off, by pressing key B for 5” one changes the unit of measure of the temperature, from Celsius to Fahrenheit
and vice versa.
SETTING THE OPERATING MODE
With the remote control switched on, key
B
allows to set one of the 4 product operating modes. Figure 1-2-3-4
displays the 4 basic displays, respectively: Manual, Automatic, Timer and Eco mode.
MANUAL Mode (MAN)
In this mode one can set the flame power manually (5 levels - act directly on key C to change).
Figure 1
AUTOMATIC Mode (AUTO)
In this mode one can set the desired room temperature, and the stove will modulate the flame power automatically to reach the
temperature.
Figure 2
If a fan is AUTOMATICALLY set, its speed depends on the power that is running the stove:
In the case of power level 1: V=1
In the case of power level 2: V=2
In the case of power level 3: V=3
In the case of power level 4: V=3
In the case of power level 5: V=3
FIG.1 FIG.2