530-325
P2008 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
3.3 The Server Setup:
Mail Server:
The system supports the E-mail protocol SMTP and can send pictures by E-mail, if the function „EventTrigger“ is
activated. To enable the system to communicate with a mail server the following data must be entered.
•
IP/Host: Here insert the IP-address of the mail server or its Internet address. Ask your mail host for this
information.
•
Mail From: Here enter the E-mail address of the sender.
•
Receipt to: Here enter the E-mail address of the receiver.
•
Account ID: Here enter the user name with which you log in to your mail server.
•
Password: Here enter the password with which you log in to your mail host.
•
Authorization: Put it to ON, if your mail host requires an authentication of the sender. Otherwise put it
to OFF.
FTP Server (File Transfer Protocol):
The system supports FTP and can send pictures to a FTP server if the function „EventTrigger“ is activated. To
enable the system to communicate with a FTP server the following data must be entered.
