530-325
P2008 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
3.2 The Network Setup:
IP Assignment:
•
STATIC: Static addressing is used were dynamic addressing is not possible technically or makes no
sense. It is common that in LANs gateways, server or network-printer usually have static IP-addresses.
In the field of Internet access static addressing is used most notably for router on a leased line. Static
addresses are usually set up manually but they also can be set up automatically. This adjustment is
recommended.
•
DHCP: If a host gets allocated a new IP-address each time it gets connected to the network it is called
dynamic addressing. In the field of LAN dynamic addressing via DHCP is widely-used.
•
PPPOE:
Dynamic addressing is usually used by Internet Service Providers which offer Internet access via
switched lines. They use dynamic addressing via PPP or PPPoE.
•
IP: Here you can allocate a valid IP-address of the network to the camera. To avoid a double allocation
of an IP-address in the network check the IP-addresses of the other network components. The IP-
address of each component you can find under: CONTROL PANEL -> NETWORK CONNECTIONS -> LAN
-> [right mouse click] -> PROPERTIES -> INTERNET PROTOCOL (TCP/IP) -> Data. The first three
numerical digit sequences, each divided by a decimal separator, are identical with all network
components. This means only the fourth numerical digit sequence is different. Its value can vary from 1
to 254.
