McNeilus HD Rear Loader Скачать руководство пользователя

Страница: 70 / 132

Rear Loader

Operation

WARNING

Do not leave the truck unattended until the

parking brake has been securely set and all

reasonable precautions have been taken to

prevent the movement of the truck. The

operator must chock the truck wheels

anytime he is away from the vehicle for an

extended period of time. Wheel chocks are

available for purchase from McNeilus Truck

and Manufacturing, Inc. by calling

888-686-7278.
Failure to comply may result in serious

personal injury or death or damage to

equipment.

3.1

Start-Up Procedure

Before starting the vehicle, make sure that:

1. Master battery switch is ON.
2. Daily Operator’s Checks have been completed and

verified.

3.2

Warm-Up Procedure

At start-up of the equipment each morning, it is important to

cycle through each of the main hydraulic circuits to be certain

each circuit is functioning properly. Cycling through each

operation also helps ensure that hydraulic fluid, which is up to

operating temperature, is also present throughout the system.

CAUTION

If you detect a problem with any control

function, it must be repaired immediately.

Do NOT operate the Packer with malfunction-

ing controls.

1. Cycle through each of the following operations:

Sweep/Pack Functions - Cycle three (3) times

Slide Functions - Cycle three (3) times

Tailgate Lock Functions - Cycle one (1) time

Tailgate Functions - Cycle one (1) time

Ejector Functions - Cycle one (1) time

Optional Functions - Cycle one (1) time

2. After completing the cycle tests, inspect the refuse

vehicle for any hydraulic leaks. If leaks are detected,

correct them BEFORE the refuse vehicle is placed into

service.

WARNING

Never disable neutral safety or interlocks.

Failure

to comply may result in serious injury or death

or damage to equipment.

Содержание HD Rear Loader





































































































































Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды

McNeilus HD Rear Loader, Руководство оператора

Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды