McNeilus HD Rear Loader, Руководство оператора

Страница: 54 / 132

© 2008 McNeilus Truck and Manufacturing, Inc.
Rear Loader
40
Operation
1.1.1 Rocker Switches
Accessories, refuse vehicle functions, and some options are
operated by rocker switches on the control box ( Figure 7 ).
The location of your switches may be different than shown,
depending on the type of truck chassis and other options.
1 2
3 4 5 6 7 8 9 10
Figure 7
The following table describes each item shown in Figure 7 .
No. Position Normal Use or Reading
1
PUMP Rocker
Switch
Press ON to activate Hydraulic Functions.
Press OFF to disable Hydraulic Functions.
2
TAILGATE
Rocker Switch
Press and hold OPEN to open tailgate.
Press and hold CLOSE to close tailgate.
3
TAG AXLE
Rocker Switch
Press UP to raise tag axle.
Press DOWN to lower tag axle.
4
PUSHER AXLE
Rocker Switch
Press UP to raise pusher axle.
Press DOWN to lower pusher axle.
5
SIDE LIGHTS
Rocker Switch
Press ON to activate side lights. Light in
rocker switch indicates side lights are ON.
Press OFF to turn side lights OFF.
6
CAMERA
ASSIST Rocker
Switch
Press ON to activate camera. Light in
rocker switch indicates camera is ON.
Press OFF to turn camera OFF.
7
STROBE LIGHT
Rocker Switch
Press ON to activate strobe light. Light in
rocker switch indicates strobe lights are
ON. Press OFF to turn strobe light OFF.
8
HOPPER
LIGHTS Rocker
Switch
Press ON to activate hopper lights. Light
in rocker switch indicates hopper lights
are ON.
Press OFF to turn hopper lights OFF.
9
EJECTOR
Rocker Switch
Press EXTEND to extend the ejector.
Press RETRACT to retract the ejector.
10
ACTIVATE
Rocker Switch
Press ACTIVATE and hold to enable the
tailgate and ejector functions.