McNeilus HD Rear Loader страница 23 Скачать руководство пользователя

Страница: 23 / 132

Rear Loader

Safety

WARNING

It is important that the pump ON indicator

light is working. No damage will be done to

the hydraulic system if the Packer is driven

with the pump in the ON position. However,

the controls will function if accidentally

bumped. This can cause serious injury or

death.

CAUTION

Always check indicator lights in the chassis

cab or on the control panel at the front of

the Packer. Replace bulbs or lights when

required. (Note: All models may not have

indicator lights.) Failure to inspect indicator

lights may lead to more serious conditions.

Never stand or position yourself under any

raised hydraulic component. Moving the control

lever of any raised hydraulic component will

cause the component to suddenly lower,

whether the E-Stop is pressed or not.
Serious personal injury or death may occur.

DANGER

WARNING

Do not leave the truck unattended until the

parking brake has been securely set and all

reasonable precautions have been taken to

prevent the movement of the truck. The

operator must chock the truck wheels

anytime he is away from the vehicle for an

extended period of time. Wheel chocks are

available for purchase from McNeilus Truck

and Manufacturing, Inc. by calling

888-686-7278.
Failure to comply may result in serious

personal injury or death or damage to

equipment.

WARNING

All owners and supervisors should make

sure all drivers, operators, and maintenance

personnel have read and thoroughly

understand the decals affixed to this Packer

as well as the safety information and

instructions in the McNeilus Operator

Manual. Owners and supervisors must

comply with ANSI Z245.1 Regulations.

Содержание HD Rear Loader





































































































































Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды

McNeilus HD Rear Loader, Руководство оператора

Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды