McNeilus HD Rear Loader страница 75 Скачать руководство пользователя

Страница: 75 / 132

Rear Loader

Operation

Figure 25

1.  Sweep panel in open position.
2.  Slide panel in lower position.
3.  Sweep panel in closed position.
4.  Slide panel in raised position.

3.7

Refuse Ejector Procedure

Ejecting refuse from the vehicle involves multiple functions.

Do not back up until you are sure the area

behind the vehicle is clear.

DANGER

1. Position rear loader appropriately for ejecting refuse.

WARNING

Be sure the area around the vehicle is clear of

non-operator personnel before and while

performing the refuse eject procedure.

Serious personal injury or death may result if

someone is near these areas while they are in

operation.

2. Unlock the turnbuckle (or optional hydraulic locks) and

open the tailgate. See Section 2.4 Turnbuckle and

Optional Hydraulic Tailgate Lock Operation and Section

2.5 Tailgate Functions for details.

3. Push the ejector control lever to dump the load (Figure

26).

4. Close the tailgate and lock the turnbuckle or optional

hydraulic lock.

5. Pull the ejector control lever to retract the ejector.

Содержание HD Rear Loader





































































































































Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды

McNeilus HD Rear Loader, Руководство оператора

Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды